Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts

Tuesday, September 11, 2018

Pedalin' to the "Cursed Pyramid Ruins".

When people think of pyramid ruins, it is usually deserts, camels, and ancient mummies that come to mind. But the ruins of the Limestone Pyramid in Needmore, Indiana are of a more modern sort.

Largely forgotten deep in the heart of Indiana, hidden the woods just nine miles north of Bedford, lie the ruins of a monument to poor planning coupled with government spending. 

The limestone of Indiana contributed to some the greatest buildings in America: the Pentagon and the Empire State Building just to name two.

In the 1970s, the town of Bedford wanted the world to recognize their contributions and thus began plans to build a set of limestone pyramids of their own based on the great Pyramids of Cheops as a means of drawing more tourists to the self proclaimed "Limestone Capital of the World."

The project was funded heavily by federal grants from the EDA. By 1980 most of the money had been spent for labor and equipment to build about 50 feet of a miniature Great Wall of China, a gatehouse, gazebo, restrooms, gift shop, concession stand and museum, along with about 17 feet of the pyramid.

Seven years and almost $700,000 federal dollars later, officials of the Economic Development Administration, which funded the proposal, called the building project a spectacular failure.

Little more than a disorganized pile of stones is all that remains of the "Cursed Pyramid Ruins" today.

It's easy to imagine how the finished project might have looked and how incredible this monolithic structure could have been.

Join me as I ride my single speed bike to go explore the "Cursed Pyramid Ruins" of Southern Indiana.




The project was the dream of one man, Merle Edington, the garrulous 64-year-old head of the local Chamber of Commmerce.

When Merle Edington returned to his hometown of Bedford in 1969 to take the Chamber of Commerce job, he was looking for a way to attract tourists to this depressed area.

Since his father, uncles, grandfather and great uncles had all worked in limestone quarries or mills, limestone quickly came to mind. His idea was to build a tourist facility that would pay tribute to the limestone industry, where people could see a quarry and perhaps even a demonstration mill.

``It became a mission with him,``

At first, there was no support from either the county or the state, but when 20 acres were donated by the Indiana Limestone Co., Edington was able to get a $500,000 grant from the development administration in 1978. He got free labor through a state training program.

The pyramid, planned to be 95 feet high and 155 square feet at the base, was to use limestone blocks that had been lying around for years. The Great Wall of China and the Mayan Temple were afterthoughts, but he was able to wheedle another $200,000 from development administration to help finance them. There was worldwide publicity and a feasibility study showed the project could draw 250,000 people a year.

Edington managed to build a heliport, restrooms, outdoor pavilion, picnic tables, and even a temporary museum in the park before running out of money. Then he lost the free labor and construction came to a halt.

"The only thing we sent to Washington more than limestone is money," Edington said in 1980. "Now I got some clowns yelling at me because I want some of it back."

Edington was aiming his tart words mostly at Sen. William Proxmire (D-Wis.), who earlier this month handed the EDA his Golden Fleece Award for approving grants for the project.

But Edington also had local critics -- they called him "the Pharaoh" -- who said that the project seemed a waste of tax money.

EDA officials, who now concede the project was a "long shot"said the potential boon to Bedford community justified the approval of $500,000 for the pyramid in 1979 and another $200,000 for the Great Wall a few years later.

And there was no way they could have done it without Merle Edington, a man who could "sell iceboxes to Eskimos".

Edington was also descibed as having "all the finesse of a slop in the puss with a manure shovel."

Still unanswered was how people would find their way to the pyramid if it was ever finished. Visitors to the site would have had to meander through Needmore on a country road that dead ends at the field.

Edington, however, said he was not worried. "If we bring a million people a year in here, someone will do something about it," he said.

But Edington's engineer, Warren T. Hobson of Indianapolis, said at the time that "At the rate of progress he's making it will take four years. My personal view is that he's going to run out of funds after two years."

Edington had some experience in procuring state and federal grants, having previously obtained $633,000 from EDA for an industrial park in Bedford. It now has only one tenant because, he says, "the interest rates are so high."

Nevertheless, he professes no concern over spending federal money for the project.

"It meets all the requirements that some welfare mother with six bastard children uses to get welfare," he said. "When it's done, there's not going to be anything like it in the history of the world."

By 1980 most of the money had been spent for labor and equipment to build about 50 feet of a miniature Great Wall of China, a gatehouse, gazebo, restrooms, gift shop, concession stand and museum, along with about 17 feet of the pyramid.

Seven years and almost 700,000 federal dollars later, officials of the Economic Development Administration, which funded the proposal, called Merle Edington`s building project a spectacular failure.

Moreover, this small southern Indiana community had been left $55,000 in debt and Edington lost his job as manager of the Bedford Chamber of Commerce.

In late 1982, the Chamber of Commerce told Edington it could no longer pay his salary.

Edington`s story is of a dream that turned into a nightmare. Today, his pyramid and Mayan temple are just piles of ragged limestone blocks in a tourist park now closed and overrun by weeds.

Edington still thought that he had a great idea. ``I don`t talk to people about it much anymore,`` the 68-year-old Indianapolis resident said. ``What can I say? There`s no use getting my blood pressure up.``

Edington never returned to the park since he left Bedford. He spent his days painting pictures of limestone quarries and buildings.

``I`m depressed that people had such a great opportunity and let it go,`` he said. ``How many other opportunities are they passing up?

Merle Edington died of cancer on November 06, 1988 in Indianapolis, Marion County, Indiana, United States.

Situated about 300 yards from the hole that provided all of the limestone for the building Empire State Building, the ruins of the pyramid are fading quietly like a forgotten monolith into the long shadows of the past.

Know Before You Go
From Roadside American: Nine miles north of Bedford (about 14-15 miles south of Bloomington) on Hwy 37. At a very lonely stoplight, turn southeast onto "Old Highway 37." The street sign is very tiny; look instead for the Dollar General, Citgo station, or the BP gas station. Old Hwy 37 dead-ends four miles later at the abandoned park.
After about three miles on old 37 there is a local brewery called the Salt Creek Brewery. Once you pass the brewery, slow down! Way too many people hurt themselves on this road. It's an old highway that ends with a big yellow gate after you round a small turn. To get to the pyramid, you should know that you must trespass onto private property. The area is largely unmonitored by the police. This site is very close to a quarry that is active to this day. When you get to the yellow metal fence in the road, pull to the side of the road. Cross the yellow fence and continue on the dilapidated old 37 and the pyramid will be visible on your right.





Sources;

Indiana`s Pyramid On Rocks
Town Can`t Even Give Away Tourist Colossus
July 28, 1985|By Eileen Ogintz, Chicago Tribune.

This Indiana Attraction Might Have Been The Next Wonder Of The World, But The Ruins Are Gorgeous
August 29, 2016 by Courtney Johnston

Indiana Pyramiders Build a Monument to Tax Dollars
By Kenneth Bredemeier and
Ron Shaffer
October 5, 1981


Stock footage courtesy of;
Pexel

Monday, January 15, 2018

Vloggin'! (Monday Mudd 01-15-18)


Bad weather doesn't stop the Works! A long rant about hopes and plans for Wingnut Bike Works in 2018. Update on the upcoming silk screening tutorial video and a conversation over a cup of mudd.

Tuesday, June 27, 2017

Pedalin' (03)



This installment of Pedalin' is actually a sort of part 2 of the last Pedalin' video. After dropping off the post I did a quick run of the dumpsters and jammed out to some most excellent noise!

Music featured:

"Haha Ur Homeless!" by
Saw Mama - https://dbramble.bandcamp.com/album/6...

"Trash" by
Dead Sally - https://deadsally.bandcamp.com/

"Misanthrope Boogie" by
Dandelion Massacre - https://dandelionmassacre.bandcamp.com/

"All Empires End' by
Johnny No-Cash - https://nomansrecords.bandcamp.com/al...

Go check out these amazing artist and kick them a few bucks!


Visit the Wingnut Bike Works Etsy shop here!
https://www.etsy.com/shop/WingnutBike...

Visit Wingnut Bike Works on Facebook here!
https://www.facebook.com/wingnutbikew...

Check out the Wingnut Bike Works Blog here!
http://wingnutbikeworks.blogspot.com/

Got a Pinterests? So does Wingnut Bike Works!
https://www.pinterest.com/figment1968...

Thanks for watching! Now get off of here and go ride yer' bike!

Pedalin' (02)



Alrighty then! Pedalin' to the post office to mail off a special sponsor package for some great people up in OR, Mima and Raquel, who host the most outrageous internet radio show known to civilization (and the uncivilized, especially the uncivilized) OUTLAW OUTRAGE Radio with MIMA & RAQUEL. Link below! 

Music featured:

"Walking On Fucking Sunshine" by 
Bip - https://bipjeffers.bandcamp.com/

"Going to the doctor" by
B. Temporary - https://btemporary.bandcamp.com/

"Running Blues" by
Fire Engine Red - https://soundcloud.com/fire-engine-red

Listen to Outlaw Outrage Radio every Thursday at...
http://skankingundergroundradio.blogs...

Visit the Wingnut Bike Works Etsy shop here!
https://www.etsy.com/shop/WingnutBike...

Visit Wingnut Bike Works on Facebook here!
https://www.facebook.com/wingnutbikew...

Check out the Wingnut Bike Works Blog here!
http://wingnutbikeworks.blogspot.com/

Got a Pinterests? So does Wingnut Bike Works!
https://www.pinterest.com/figment1968...

Thanks for watching! Now get off of here and go ride yer' bike!

Saturday, April 15, 2017

Friday, February 24, 2017

Very first play of the latest stringed thing that I built here at the Works.

I had a few people ask me "How do you build those things?" in reference to the Cigar Box Guitars and Diddley Bows that I make. So I figured that I would give a brief answer here today.

First you go out and dig around in the trash for materials such as scraps of hardwood, old cigar boxes or jewelry boxes and the likes. I even find guitars, violins and other instruments in the trash. Some are more busted than others but all can be used for parts! You can find everything you need to build a noise making instrument right in the dumpsters! Seriously, you just have to start looking at things differently. Instead of seeing a busted hinge, I see a an interesting way to secure guitar strings to the body of the build. Instead of seeing an old rusted bolt, I see a bridge that has some character. It is all a matter of perception and perspective. So I start off by going out on my bike and jumping into the cesspool of societies waste!

After gathering up the necessary materials I started by fashioning the neck. I was fortunate enough to get a good scrap piece of nice hard wood for this build. It all starts with the hand saw.

 I made the cuts for the basic shape that I am aiming for. Once that was done I pulled out the old hammer and chisel to clear out the unwanted chunks of material.

After a few minutes of wacking the chisel, and I ended up with a very crudely shaped neck. Next I grab the files and augers and do a little refining on the shape of the neck.

In the meantime I went ahead and soldered up the wiring for the piezo disc pickup and mono input jack.


Then I cut out the notches in the box to fit the neck into. I usually use a miter saw for this step but decided to break out the rotary tool for this one. It came out pretty good.


After a little filing and sanding to smooth out the edges of the cut I moved onto the next step which was doing a final sanding on the neck by hand to get it as smooth as possible. No one wants to get a splinter while picking!

Next I got out the drill and some screws and mounted the neck onto the box.

After that I got out the hot glue gun and mounted the pick-up and jack assembly inside of the box body of the guitar.

Once that was done all I really had left to do was to string it up and plug it in. First I wanted to add a little artistic touch and give the instrument a one of a kind unique finish.

Once it was "purdied" up a bit, it was ready to make some noise!

Thanks for stopping by, now go ride your bike!

Friday, January 27, 2017

Patching things up!

Fresh punk patches coming from the Wingnut Bike Works etsy shop!
Show off your bike pride and your punk attitude with these original and fresh "Bikes Not Bombs" sew on punk patches!

Tuesday, September 6, 2016

Punk Tees

When I was a kid growing up concert t-shirts were part of my daily attire. As I began to listen to more independent punk bands I discovered that most of them did not even have a tape or record available, let alone any merchandise or Band T-shirts. So us kids decided to make our own.
I remember swiping a bunch of those clear plastic sheets that were used in overhead projectors from my middle school to cut stencils on. Us kids would sit around smoking low grade marijuana while listening to crappy cassette tapes of our favorite punk bands and draw out what we thought were the most rad designs ever to promote our musical idols. Then using a razor knife that I had pilfered from my step-dads toolbox we would proceed to slice and dice us up some stencils from the clear plastic sheets for the projector. With a little spray paint and practice all of our old stained and torn t-shirts were transformed into kick-butt band shirts! Also, since we used spray paint, the shirts lasted longer than most of the Band Shirts that we had bought!
Years later I would graduate to an air-brush and create lots of cool shirts as well as murals on cars, boats, motorbikes, and even a train. I think that I owe that time I spent behind an air-brush to those old DIY spray painted band shirts that I made as a kid. Now I have went full circle and am making old school DIY punk style spray painted T-shirts. Mostly, I have been just giving them away around town here to the people I meet on the streets,  but I think that I might throw a few out in the Etsy shop for $5 bucks a piece and see if anyone is interested.

The above shirt is one I sprayed using an original stencil that I designed to be used to create some canvas artwork, but I think it looks great on a Tee as well. You can find the original artworks at the Etsy shop .
Thanks for stopping by, now get off of the internet and go ride your bike!

Thursday, August 25, 2016

Cluttering up the Works.


Greetings good peeps, and welcome to the Works. It is in this small two room studio in Bloomington, Indiana that I create all of the unique things that are featured at Wingnut Bike Works. That includes the stinged things, such as diddly bows and cigar box guitars, that I hand craft utilizing recycled materials and old bicycle parts.


The Works also serves as my artist studio where I enjoy painting when I get the down time to do so. I love the location, as it sits right on "restaurant row" in the central downtown area but space is always an issue in such a small place.


Oh, and did I mention that I also repair and build bicycles at the Works? This is another challenge when it comes to actual work space at the Works.


Then there is the always rotating inventory of stock that is continually coming in from my daily dumpster diving excursions. Thankfully I have Larry (the furry blue guy) and Rosco (the roadkill raccoon) to keep an eye on things for me.


Despite their efforts, however, those two are no better at getting rid of clutter here at the Works than I am as my "office area" will attest to.


Drinking dumpstered coffee and admiring my chaos, I decided that it was time to clear out some of the clutter in the Works and in my life.


Just take a look around and you will see what I mean. For instance, I have an ever growing collection of cheap sunglasses that I have found in the dumpsters over the past year or so.


Any one who knows me at all knows that I am hardly ever caught without a pair of these babies on, but I am starting to think that I might have a few too many pairs right now.


Additional to my own art work that is hanging and stacked all over the place, I also like to keep a few pieces from other local "street artist" on my walls. The above piece was done by a homeless guy known as "Artist Will". It was done on half of a broken door. I love it!


Even the T.R.E.A.M. garden I am working on out in back is getting a little cluttered. So I took another swig of mud and began to get to work on getting rid of all the things that are cluttering up the works. By the time it started to get dark out I had made some real progress.


To celebrate, and to help get rid of some inventory that is taking up space, I decided to throw a big sale in the online Wingnut Bike Works Etsy Shop!


Of course I have fresh clutter as of this morning, but isn't that just life all over? So if you are reading this then help me out by going to visit the online shop and taking some of my awesome clutter off of my hands? Sorry, but Larry and Rosco will not be for sale! My jewelry and art and unique stringed things will be however and I slashed the prices on everything to get it out the door.


Thanks for stopping by! Now go put something fun between your legs and RiDe YeR' BiKe!


Wednesday, August 10, 2016

The "Works" has reached Iceland!

Another happy and satisfied customer recently purchased a custom order for 4 of the awesome chain link bracelets to take back to friends that are on a bike team in Iceland. How cool is that?!

Saturday, July 23, 2016

Come on and make the noize!


This is the latest one of a kind hand crafted Diddly Bow that I made using recycled items and old bicycle parts. I call this one "Lil' Buck". It is a one string Diddly Bow that I made using an old Buck knives tin, and salvaged items. I added a pickup to this one to make it wail!

This unique one string Diddly Bow style CBG is sharp!
If you would like to make some noize on this little number you can find it up for grabs in the WBW Shop
Or if you are a local to B-town you can save yourself the shipping by going HERE!
Now get off of your ass and go ride yer bike!

Wednesday, July 6, 2016

A simple pine box (CBG)

Life isn't all about bicycles, sometimes you just got to make some noise! So when I came across this simple little wooden puzzle box, I just couldn't resist taking it and turning it into a "stanged thang". In this case, I planned on making a simple two string cigar box guitar, known as a chugger. I went searching through the wood pile and found an old piece of scrap wood from another project that would serve well as the neck for my prospected noise maker. Then, after compiling all of the necessary components like tuners, strings, and hardware accessories like nuts and bolts, screws and nails, I proceeded to sand and chisel away to create the instrument. After a few hours I had the makings of a CBG (cigar box guitar).
It was when I decided to electrify the contraption that I ran into a slight problem. I wanted to add a pickup and jack, both of which I had laying around the Works. The problem was that I did not have any electrical wire to use to install the parts. So I did what I always do when I need parts and supplies. I went dumpster diving!
It wasn't long before I came up with something useful. I found this JVC tape deck player that someone had thrown out. Normally I would have kept it to reuse (i love me some old school mix tapes!), but in this case someone had already cut the main power cord off of it, and besides I had other plans for it on that day. I pedaled back to the Works with this monstrosity in tow. Once back at the shop I busted out the toolbox and began dissecting the defunct electronic component in order to harvest it's parts.
It was easy work to remove the screws that held the casing together and pull apart it's plastic shell to reveal the tangled veins of copper that lay inside.
After a few snips, I had more than enough electrical wiring to do the job at hand!
Then it was back to the work table to finish off my latest creation. After some measuring, some drilling, some staining and sanding, I soldered the whole pile of trash together and ended up with this "Simple Pine Box" of a CBG!

 It is lightweight and very "clean" looking without a lot of frills or embellishments other than the standard random bike parts that I always like to incorporate into everything I build.

In this case I utilized an old sprocket from the rear hub of a bicycle to accent the sound hole, and a couple of old chain links from a discarded bicycle chain to hold the strings in place.

And when it is plugged in, it sounds like the Devil's music! But don't take my word for it, watch the video of me demonstrating the way it sounds.

If you like what you see and hear then go to the WBW Etsy shop to find out more on how you could bring this sick little number into your life! Thanks for stopping by and until next time, keep pedaling and keep making noise!

Saturday, March 12, 2016

Making things with noisey strings!


https://www.facebook.com/events/502422346630802/
I have been making things with strings from dumpstered items and old bicycle parts to bring to the Bloomington Bike Swap. Diddly Bos, Chuggers, and Cigar Box Guitars oh my! Plus bracelets, belts, lighter leashes and other fine jewelry created using old bike parts to upgrade your fashion look! Also I will be bringing some of my original "bike themed" art for you to slap up on your walls! Oh, did I mentio0n FREEBIES!? Oh yeah there will be some sweet swag to be given away as well! See you there next Saturday!

Thursday, February 11, 2016

A picture is worth a thousand words.

It is always nice to receive some kind words too however. I get really stoked whenever I see someone wearing one of my creations. I love it when I see awesome people wearing my swag or to see my artwork hanging on their walls. So when I went to the Etsy shop and found this message in my inbox it made my day!
To think that such a young little dude is so stoked to be sporting my wears. Ride on little man, ride on. Thank you Lori, for shopping with Wingnut Bike Works on such a special occasion. Congratulations on the anniversary and send some pics of the event!